Besides it has the advantages of MG-1, which  is suitable  for using in the places of big sides force of frequent reciprocation. The function is similar as DP4 overseas. Now it replaces the MG-1 step by step.

Material Structure

1. PTFE with  oil fibre 0.01~0.03mm

2. Porous bronze  0.2~0.35mm

3. Steel backing 0.7~2.3mm

4. Tin-plating 0.005mm or copper plating 0.008mm

Standard Size：

Cylindrical Bearing , Flange Bearing, Thrust washer , Strip .

Non-Standard Size：

Cylindrical Bearing, Flange Bearing, Thrust washer, Strip, Bearing bushing, Wear strips, Steel combine units.

◆ Introduction:

MG-1A is a composite material of PTFE compound  tape on aluminum shell, the PTFE tape is up to 0.20mm thickness enabling the bearing can be sized after fixed, meanwhile the thick PTFE layer isolates noise. The bearing is widely applied in OA machinery, shock absorber for light design bicycle.

◆ Material Structure

◆Technical Data

◆ Introduction:

This new material uses the PTFE fibre fabric overlay on steel backing, the fabric is with high load capacity and much longer operating life compared with conventional 3-layer bushes.

◆Technical Data

MG-800 Bimetallic self-lubricating bearing uses high quality low-carbon steel plate as backing, sintered porous bronze as its liner; suitable for rotatory oscillating, reciprocating movements in the conditions of high load, low speed, low friction, wear resistance; with a long working life span on preventing the mating parts from holding-on. The bronze layer surface can be machined with various grooves, oil pockets in terms of different working conditions. The product is widely used in mining machinery, automobile, building machinery, agriculture equipment, rolling steel industry etc.

MG-2Y can work for a long time without oil in the condition of prelubricated with lubrication indents design. It is widely applied in metallurgy machinery, mining machinery, water conservancy machinery, automobile, building machinery, agriculture machinery, rolling steel industry etc.

MG-090 bronze self-lubricating bearings use a kind of high density bronze alloy of special compositions as backing, the surface of alloy is rolled with diamond pattern of the oil indents or half ball oil indents, this kind of bearing has a higher density, a higher load capacity and a better anti-wear resistant performance. It has been widely used in many fields such as hoist machine, building machinery, machine tool industry and mining machinery.

Machined  cast bronze bearings offer technically and economically favorable bearings solutions. It is with high load capability, low weight and good corrosion resistance. MG can offer different types of bronze alloys according to the required life time, service etc. The tolerance is much tighter than wrapped bronze bushes.

◆ Introduction

High strength glass fiber with epoxy resin baked with PTFE and special fiber as bearing  lining, the back material provides high load capacity and bearing lining offers low friction under dry condition. Therefore, this special structure offered an outstanding anti-wear feature and anti-impact performance, suitable for high load with high corrosion resistance application like lifting machinery, logistic machinery, agricultural machinery, and port machinery etc.

◆ Material Structure:

◆ Technical Data

Technical Data
Basic type	MG-CRB Standard	MG-CRG High load	MG-CRP High speed	MG-CRF Economic
Density	2	2	2	1.3
(dry)*m/s Max. PV  N/mm	1.8	2	1.6	1.2
Coecient of friction	0.03-0.12	0.03-0.12	0.02-0.12	0.08-0.30
Working Temp. ℃	-100~+160	-100~+160	-100~+160	-40~+130
Max. Speed  m/s	0.2	0.2	0.4	0.13
Max. load MPa	420	420	420	300
Static load MPa	240	240	240	150
Dynamic load MPa	140	160	30	45
Radial compressive strength MPa	550	550	550	200
HRR Rockwell hardness	95	95	95	90
Linear coef. of thermal Expansion(25 ~150"C)	13	13	13	40
Color	Coffee	Black	White	Dark grey

◆ Wrapped bearings dimensional inspection

Wrapped bushes 1803547-2

The wall thickness and the inside diamter shall not be specified together on the same drawing.

◆ Turmed bearings

Machined high precision bearings can be checked by pneumatic measuring tooling, three point micrometer, CMM measuring machines and so on.

◆ Structure  

MG-EPB series material is a thermal mould character plastic processed by crystal engineering plastic as basic material with proper intensifier and lubricant. The rigidity and high temperature engineer capability is greatly improved because of the use of intensifier, at the same time, the coefficient of thermal expansion, moulding shrinking rate and wriggle capability decreases, consequently, the size stability is improved, and EPB series material range is enlarged and keeps the intrinsic anti-wear capability and anti-drug capability.

◆ Material Structure:

◆ Features:

•Maintenance-free dry operation

•Excellent wear resistance

•Lower friction

•Lower moisture absorption

•Chemical solvent resistance

•Nice insulated

•Save space and light

•Mass production with lower cost

•Can meet RoHS standard